Содержание Раздел: Механическая часть
Все разделы

Как отрегулировать reverse lamp and starter inhibitor switch Citroen Xsara Picasso I

Механическая часть ~1 мин чтения

Предварительная операция

Отключить отрицательный кабель аккумуляторной батареи

Remove switch (1) equipped with its washer

Fit a new switch equipped with a washer (min. thickness 1,4 mm)

Tighten the (1) assembly to 4 m.daN

Подключите отрицательный кабель аккумуляторной батареи

Checking the adjustment

Before carrying out the checks

  • Нажимать на педаль тормоза и поддерживать давление
  • Handbrake firmly engaged

The engine can be started if

  • Рычаг селектора в положении "N"
  • Рычаг селектора в положении "P"

Невозможен пуск двигателя

  • The selector lever is in any other position
  • The selection lever is moved from position N to position D (смотреть примечание)
  • The selection lever is moved from position N to position R (смотреть примечание)
  • The selection lever is moved from position P to position R (смотреть примечание)

ПримечаниеThe vehicle should not be able to start during the whole operation

Фонаря заднего хода

  • Подача тока к фонарям заднего хода: рычаг селектора в положении "R"
  • The reversing lamps go out if: the selector lever is in any other position

If only one of these checks is not satisfactory

  • Replace the switch washer by a washer of a thickness greater than 0,2 mm
  • Повторить регулировку