Communication with TEP 92
- Проверка приводов - ????не использовать данный код (использовать код - 14053 -)????
- Измерения параметров - ????не использовать данный код (использовать код - 14053 -)????
| detection condition(s) | проверки условия проведения контроля |
|---|---|
| зажигание включено | проверить: - earth at terminal 2 on the blower module 4 way MR connector - 12 V across terminal 4 of the 4 way MR connector of the blower unit - 12 V between terminals 3 and 15 of the ECU - voltage variation from 0 to 12 V between terminals 3 and 12 of the ECU depending on the blower unit control - voltage variation from 0 to 12 V between terminals 5 and 3 of the ECU depending on the blower unit control - неразрывность и изоляция провода (проводов) проверить работоспособность электродвигателя вентилятора печки: тестирование 1 - 12 volts on the red wire - black wire earthed - the blower unit does not operate: заменить вентилятор печки check the operation of the blower module: тестирование 1 - 12 V positive across terminal 4 of the blower unit - earth at terminal 2 on the blower module - the blower unit is operating: заменить модуль вентилятора печки тестирование 2 12 V positive across terminal 4 of the blower unit - earth at terminal 2 on the blower module - earth at terminal 3 on the blower module the blower unit does not operate: заменить модуль вентилятора печки тестирование 3 - 12 V positive across terminal 4 of the blower unit - earth at terminal 2 on the blower module - fit a fly lead between terminals 1 and 3 of the blower unit - the blower unit does not operate заменить модуль вентилятора печки |