Separate expansion chambers have been modified which changes the fitting of the the supply hoses
This change involves reducing the length of the supply hose connection by 15 mm compared with the earlier assembly
Идентификация
Старая сборка
(1) Расширительный бачок: реферанс P.R 1307.GL
Новая сборка
(2) Расширительный бачок: реферанс P.R 1307.HS
The new expansion chamber is fitted in place of the earlier one, without modification
The fitting of the new expansion chamber involves replacement of the supply hose Part No. 1341.53 with a new hose Part No. 1341.A4
Fitting the old supply hoses and the new expansion chamber hoses is made possible by protecting the hose where it makes contact with the chassis leg
Взаимозаменяемость
Parts Division will now only supply the new expansion chambers
When fitting new supply hoses to old expansion chambers, make sure that the gap between the hose and the power steering pulley is at least 10 mm