Главная/Peugeot/605/Peugeot 605 I (1989-1999)/Руководство по ремонту/Механическая часть/Измерение параметров (XUD11BTE 2088 4 цил. диз. турбо интер…
Содержание Раздел: Механическая часть
Все разделы

Измерение параметров (XUD11BTE 2088 4 цил. диз. турбо интеркул.) Peugeot 605 I

Механическая часть ~1 мин чтения

To make the exhaust gas recirculation regulation function diagnostics easier, 4 new parameters are available

These parameters are displayed via the TEP 92 or the DIAG 2000 in the Miscellaneous parameter measurements section

THROTTLE SOL. V.

  • Throttle opening solenoid valve control voltage
  • При движении автомобиля 3V ≤ THROTTLE SOL. V. ≤ 15V (температура охлаждающей жидкости выше 80 ° C + vehicle being driven with alternating full-load acceleration and foot off)

AIR FLOW REQ.

  • Air flow required by the ECU
  • This value must be equal to the value: AIR FLOW MEAS. (at ± 16 g/s)

AIR FLOW MEAS.

  • Air flow measured by the flow meter following interpretation by the ECU
  • This value must be equal to the value: AIR FLOW REQ. (at ± 16 g/s)

AIR FLOW NOT CORR.

  • Расход воздуха не скорректирован
  • Air flow before interpretation by ECU
  • This value must be equal to the value: AIR FLOW (AIR FLOW MEAS.)