ВниманиеCheck that the outer sleeve of the cable is correctly clipped (engine side of the throttle butterfly control)
To gain access to the nuts (1) - (2), remove the various elements around them
Отвинтить гайки (1), (2)
Нажать до упора на педаль акселератора (пример: Упор для педали)
Pull gently on the sleeve (3) in order to tighten the cable
Tighten the bolt (2) until it is in contact with its bracket (4)
Guarantee some play by slackening the bolt (2) by a half turn to one turn
Затянуть гайку 1
Установить на место ранее снятые детали
Выполнить процедуру 098Z
Провести дорожные испытания разных фаз регулирования