Crimping the nipple
The nipple (1) is crimped only on a new cable
ПримечаниеBody jig
These positions are given for the cable pulled to the tight spot on the cam (cable vertical and attached only to the gearbox)
| X (mm) | двигатели | Номер коробки передач - номенклатура ZF (1) |
|---|---|---|
| 41 | 037 - 055 - 071 | |
| 43 | 095 - 105 - 124 - 166 - 203 | |
| 43 | XU10J2TE | 110 - 160 - 170 - 172 - 181 - 183 |
| 42 | XU10J4R | 158 - 195 |
| 44 | 035 - 070 - 076 - 054 - 078 | |
| 46 | 107 - 126 - 151 - 096 - 156 - 163 - 200 | |
| 43 | 056 - 072 | |
| 46 | 101 - 122 - 131 - 133 | |
| 44 | 191 |
Fitting the load correction cable
B = 39 mm
B = 39 mm
B = 39 mm
B = 39 mm
Проверка
Потяните за трос до сопротивления
The nipple (1) should be located at (B) = 39 mm from the end of the outer cable
Adjusting the outer cable
In the idle position, the play (C) should be from 0,5 mm to a maximum of 1 mm
Adjust the play by means of the nuts (2)