Специальное оборудование
[1] оправка для снятия и установки подшипника ступицы
| автомобиль | реферанс приспособления [1] |
|---|---|
| 106 | (-).0533-B |
| 205 | (-).0526-X - (-).0526-Y |
| 206 | (-).0539-T |
| 306 | (-).0526-X - (-).0526-Y |
| 309 | (-).0526-X - (-).0526-Y |
[2] tool for removing the stop ring (-).0540
Снятие
Снять заднюю ступицу (смотреть соответствующую гамму)
Установите приспособление [2]
Adjust the gap between the jaws to the minimum
Position the first jaw at the bottom of the groove
Engage the second jaw at the bottom of the groove
Turn the knob (A) to make the gap between the jaws as large as possible
Release the stop ring from the bottom of the groove by pivoting the tool [2]
Slide a screwdriver behind the stop ring
Снять: Стопорное кольцо (/)
Вынуть подшипник с помощью приспособления [1]
Установка
Clean the hub
Coat the outside of the bearing with grease to make fitting easier
Вставить до упора подшипник с помощью приспособления [1]
Систематически заменять: Стопорное кольцо (/)
Установите
- Стопорное кольцо (/)
- Ступица с барабаном (смотреть соответствующую гамму)