Доработка заднее крепление
Детали, которые были изменены
- стопорные кольца подшипника
- кулак
- шайба
- герметизирующую заглушку ступицы
Идентификация
Старая сборка
Identification of the type of assembly is by means of the circlip (1)
| крепления упора подшипника | шайба | диаметр | толщиной 106-206 | толщиной 205-309-306 |
|---|---|---|---|---|
| стопорные кольца (1) | (2) | 38 | 3.5 | 2 |
Новая сборка
Identification of the type of assembly is by the stop ring (1)
| крепления упора подшипника | шайбу | диаметр | толщиной |
|---|---|---|---|
| стопорное кольцо (1) | 2 | 48 | 4 |
Особенность'
106: a certain number of vehicles manufactured before the end of 1998, have the only authorised mixed assembly (circlip + washer Ø 38)
After carrying out work on these vehicles, fit a circlip + washer assembly Ø 48
Взаимозаменяемость
Interchangeability not allowed
Parts of the earlier and later assemblies must not be mixed
Dpr продает комплекты для двух вариантов установки
Replacement of arm: по исчерпанию запасов, Parts Division will supply an arm fitted with a new stub axle with a wheel bearing assembly