Как снять и установить rear cross member flexible mountings Citroen Saxo I

Рекомендуемое оборудование

[1] extraction button 4502-T.D1

[2] extraction abutment 4502-T.D2

[3] установочная оправка 4502-T.D3

[4] fitting end piece 4502-T.D4

[5] screw, nut and 4502-T.D5 washer

Снятие

Снимите задний мост (см. соответствующую операцию)

Mount the tools [1] [2] and [5] on the silent block

Extract the flexible mount, by screwing the nut

Repeat the operation on the 3 other silent blocks

Установка

The recesses must be tilted from 18 to 21° (угол A)

Mount the tools [3] [4] and [5] on the silent block

Tighten the assembly until it is hard against the shoulder of the tool on the rear cross member arm

Repeat the operation on the 3 other silent blocks