ВниманиеСоблюдайте меры предосторожности
Рекомендуемое оборудование
[1] детектор утечек FRAMET DF9
Датчик ЖГ
Снятие
ВниманиеIt is removed with the LPG tank drained and the vehicle outside the workshop
Снимите 2 болт (1) (diagonally opposite)
Slacken the other 2 bolts (1) by a few turns
ВниманиеUnder the effect of the residual pressure, the gauge rises thus allowing the pressure to escape
Для окончания операции снимите оставшиеся болты (1)
Ослабить штуцер (2)
Отодвиньте трубку (3)
Remove the gauge (4) whilst guiding the lever (5)
Установка
Refit the gauge (с новой прокладкой)
ВниманиеAngle the gauge (connector downwards)
Установить и зажать 4 болт (1)
Переставьте трубку (3)
Coat the thread of the following connectors with LOCTITE RACORETANCH
- Соединение (2)
- The tank outlet connector
Затянуть соединение (2)
Connect the LPG gauge (4)
Connect the safety electrovalve
Подсоедините обратно аккумуляторную батарею
Put 10 l of LPG in the tank
Запустить двигатель
Перейти на работу в режиме агазб
ВниманиеCheck that the connectors and gauge are sealed с помощью приспособления [1]
Установите
- The accessories unit cover
- The tank cover