Контур системы питания воздухом
(1) воздушный фильтр
(2) впускной коллектор
(3) клапан EGR
- SOFABEX 0911700
- PURFLUX
(4) электроклапан управления заслонкой системы рециркуляции отработавших газов: EATON
Контур рециркуляции отработавших газов
Engines meeting emission standard L3 are fitted with an "EGR" exhaust gas recycling device
Цель системы рециркуляции отработавших газов (EGR) - снижение содержания оксидов азота (NOx) в выпускаемых в атмосферу отработавших газах
This reduction is obtained by recycling part of the exhaust gases in the inlet duct
The conditions for the recycling are a function of the engine water temperature and load
Состав
(5) воздушный фильтр
(6) контактор нагрузки
(7) 60 °C thermal switch
(8) выпускная система
(9) клапан рециркуляции
(10) вакуумный насос
(11) электромагнитный клапан EGR
Размещение
The load switch is fitted to the injection pump
The thermal switch is fitted to the water outlet housing (2-way green connector)
Клапан рециркуляции установлен в выпускном коллекторе
The vacuum pump is situated on camshaft end
The EGR electrovalve operates the recycling valve
The recycling valve (9) is controlled by the vacuum pump (10) when the electrovalve (11) receives an electrical feed
Electrovalve (11) is activated when
- При работающем двигателе
- Температуре охлаждающей жидкости выше 60°C
- The engine load is inferior to the limit indicated by injection pump load switch (6)