Начиная с серийных номеров следующих двигателей
| маркировка узла | номер двигателя |
|---|---|
| 10KJN2 | 2002147 |
| 10KJN5 | 2001636 |
| 10KJN6 | 2012305 |
| 10KJN7 | 2004411 |
| 10KJN8 | 2000025 |
| 10KJN9 | 2000414 |
| 10KJP1 | 2000061 |
| 10KJP2 | 2000289 |
| 10KJP3 | 2000103 |
| 10KJP4 | 2000387 |
| 10KJR3 | 2000363 |
| 10KJR4 | 2002132 |
| 10KJR5 | 2000701 |
| 10KJR6 | 2000006 |
| 10KJR7 | 2000055 |
| 10KJR9 | 2000078 |
| 10KJS1 | 2000079 |
| 10KJS2 | 2000055 |
| 10KJS3 | 2000061 |
| 10KJS4 | 2000205 |
Engines XU7JP4 are fitted with a dynamic roller tensioner for the timing belt
Старая конструкция
Ручной натяжной ролик (1)
Болт 8 x 125 длина 30 mm (2)
Шпилька (3)
Новая конструкция
Динамический натяжной ролик (4)
Болт 8 x 125 длина 60 mm (5)
ВниманиеAlways replace the previous assembly with the new assembly
Взаимозаменяемость
Only the new dynamic roller tensioner will be fitted as a replacement
This new assembly requires modification of the method for replacement of the timing belt
Depending on the vehicle specification and the contents of the timing kits supplied as replacements, the fixed roller assembly differs by the length of the bolt
It is therefore necessary to adapt the length of the bolt depending on the assembly
1-я установка
With the steel fixed roller (7), fit a bolt (6), 55 mm long part no. 6921.91 + Loctite tightened to 3,7 da.Nm
2-я установка
With the machined steel fixed roller (9), fit a bolt (8), 35 mm long Part no. 6923.72 + Loctite tightened to 3,7 da.Nm