This operation is necessary: after any work on the fuel system requiring complete draining of the system between the tank and the injectors
Возможны два метода
Первый способ: using the diagnostic equipment, carry out two fuel pump actuator tests (duration of an actuator test: approximately 10 seconds)
Второй способ
- Произвести стирание ошибок
- Выключить зажигание
- Нажать до упора на педаль акселератора
- Включить зажигание
- Leave the pedal pressed for approximately 1 second(s), the fuel pump then operates for between 20 and 30 seconds
- When the pump has stopped, switch off the ignition
ВниманиеThis strategy is implemented in the ECUs fitted to vehicles with a non-return injection rail