Field Remedy: 1632
| Subject: | Common Rail Engines - Bad idle, lack of power after ECU or injector replacement |
|---|
| Models: | Engines: | Option: |
|---|
| Agila 2004...,Corsa-C 2004...,Meriva 2004...,Vectra-C 2004... | Z13DT,Z13DT| Z17DTH,Z17DTH,Z19DT| Z19DTH | None |
| Complaint: | Bad idle, lack of power after ECU or injector replacement |
|---|
| Cause: | Injector flow adjustment not carried out. Each injector has it's own classification which has to be programmed after ECU or injector replacement. |
| Production: | Not affected |
In case of ECU or Injector replacement the Injector Flow Adjustment needs to be done according Service Instruction at the following engines/carlines: Z13DT (Bosch Application) -> Agila and Corsa-C Z17DTH (Denso Application) -> Corsa-C and Meriva. Z19DT/DTH (Bosch Application) -> Vectra-C (as of MY04.5).
The program the injectors proceed as follows: 1. Select vehicle diagnosis -->> Enter 2. Select modelyear -->> Enter 3. Select model -->> Enter 4. Select engine -->> Enter 5. Select Programming -->> Enter 6. Select Injector Replacement -->> Enter 7. Select Cylinder -->> Enter - Change - Enter classification code - Confirm The programming procedure will be available as of TIS-CD 48.
| FunctionalGroup: | J - Engine |
|---|
| Complaint Group: | 18 - Poor Drivebility |
| Trouble Code: | None |
