Sensors
There are four sensors on the hydraulic shifting assembly. The four sensors are as follows:
- Hydraulic pressure sensor
- Gear selection position sensor
- Gate selection position sensor
- Clutch actuation position sensor
Pressure Sensor
The hydraulic pressure sensor (1) screws into the power unit housing of the hydraulic shifting assembly. An O ring (2) is installed on the hydraulic pressure sensor.
Position Sensors
The gear selection position sensor, gate selection position sensor and clutch actuation position sensor are functionally identical. Each sensor (1) is secured to the actuator housing of the hydraulic shifting assembly with two screws (2).
• Service: The hydraulic shifting assembly is bled in conjunction with Tech 2.