Общие сведения
Since October 1995, the TEROSON glass bonding range has been marketed within the Peugeot network
This approval is intended to complement the bonding products already supplied by GURIT and SPCA (TOGO) by offering a new type of high speed single component adhesive. its importance lies in meeting the expectations of users regarding speed and simplicity of use
Composition and characteristics of the TEROSON range
This range comprises 3 single component polyurethane bonding kits from factory production
| name of kit | номер (реферанс) | тип | первичная грунтовка (праймер) | очиститель | exposure time | replacement time | примечание |
|---|---|---|---|---|---|---|---|
| STANDARD | 9799.E5 | 30' | 2h30 (без подушки безопасности) 12h (подушка безопасности) | additive in cartridge 9726.76 | |||
| RAPIDE | 9799.E4 | 25' | 1h30 (без подушки безопасности) 6h (подушка безопасности) | additive in cartridge 9726.75 | |||
| ULTRA RAPIDE | 9799.E3 | 15' | 30' (имеется или отсутствует подушка безопасности) | подогреватель сменного тюбика 9799.E2 additive in cartridge 9726.74 |
ПримечаниеThe times given are valid for application at 23 deg. C and relative humidity of 50 %
Применения
The basic method of fitting a windscreen is the same as for the single component products supplied by GURIT and SPCA (TOGO) (refer to the technical instructions for the relevant vehicle), except for the very high speed kit
The bonding agent should be used warm to reduce its viscosity. the cartridge must therefore be warmed up for 15 minutes at 60 deg. C in the cartridge heater provided for this purpose
ПримечаниеA cartridge can be reheated several times
Health and safety
Follow the basic safety rules
- Работайте в вентилируемом помещении
- Одеть защитные перчатки и очки