Идентификация
(1) mat not drilled до N° de DAM 7324XX
(2) mat drilled (2 отверстие(ий) (A) Ø 20 mm) начиная с N° de DAM 7325XX
(3) mat not drilled до N° de DAM 7324XX
(4) mat drilled 2 отверстие(ий) (A) Ø 20 mm) начиная с N° de DAM 7325XX
Mounting kit Part No. 7583.HC
ВниманиеThe mats with velcro fastening strips at the front must also be secured to the carpet using the mounting kit no. 7583.HC
Решение, принимаемое на уровне сервисной станции
Updating of the mats to the drilled version
DAG: с левым расположением рулевого колеса
DAD: с правым расположением рулевого колеса
Using a cutting tool, drill 2 holes 20 mm mm in diameter as required
Fitting procedure
Position the mat on the floor making contact with points (A) and (B)
ВниманиеBy operating the pedals several times, check that they do not foul the front edge of the carpet, reposition the mat if necessary
Lift the rear part of the mat and insert each mounting (6) into the holes (Ø 20 mm)
Press down the mat and the mountings (6) on the carpet
Using a spanner, engage and tighten the mountings on the carpet, without applying too much force
Clip the retaining covers (7) by pressing down on them and check their strength and their position on the mat
Решение в серийном производстве
Начиная с номера DAM (даты введения модификации) 7660XX
Fitting instructions for mats included in the plastic package containing the kit for the right hand drive and left hand drive mats