The air conditioning device with temperature regulation is designed to help the driver obtain optimum comfort and safety
In the AUTO position, an ECU receives the information
- Температура охлаждающей жидкости
- Температура испарителя
- Температура снаружи
- Температура внутри салона
- Temperature setting selected by the driver
This ECU automatically controls
- Частота вращения вентилятора
- The position of the mixer flap
- The start of operation of the air conditioning compressor
Control panel
- (1) air conditioning control switch (air cooling)
- (2) selection of the flow of air blown or of the AUTO position (temperature and flow regulation)
- (3) auto. mode position
- (4) выключатель положения ?Рециркуляция?
- (5) required passenger compartment temperature selection
- (6) selection of air flow direction
- (7) air conditioning operating light
- (8) recirculation position light
- (A) положение обдува стекла
- (B) all positions except demisting
The heat comfort setting is obtained by operating the various controls on the panel
The ECU records the selected position 15 seconds after it is selected
If the ignition is switched off before the information is stored (within 15 seconds of the new selection being made), the position will not be recorded
ПримечаниеHowever, there is a relationship within the ECU between the different parameters which it measures and the driver's selection; this internal relationship may cause the air conditioning to cut in when the ignition is switched on again even if the last stored driver selection did not request this
Using the air conditioning function
The air conditioning function can be activated in various ways
- Нажимая на кнопку A/C (1)
- By selecting the demisting position
- By selecting the recirculation function
Deselecting the demisting or recirculation positions does not deactivate the air conditioning
To deactivate the air conditioning function, press the A/C button (1)
ПримечаниеSelecting the demisting position automatically deactivates the recirculation function
Сводная таблица
The tables below summarise the effect of operation of the other controls on the air conditioning and recirculation functions
7 examples of operation are illustrated, the first line of each example indicates the position of the controls on the panel when the ignition is switched on
0 = не нажимать на кнопку
D = положение обдува стекла
HD = all positions except demisting
| клавиша A/C (1) | клавиша REC (4) | положение селектора 6 | состояние: воздушный кондиционер | состояние: рециркуляция |
|---|---|---|---|---|
| 0 | ход | |||
| 1 | остановка |
| клавиша A/C (1) | клавиша REC (4) | положение селектора 6 | состояние: воздушный кондиционер | состояние: рециркуляция |
|---|---|---|---|---|
| 0 | D | |||
| 0 | ||||
| 1 | остановка |
| клавиша A/C (1) | клавиша REC (4) | положение селектора 6 | состояние: воздушный кондиционер | состояние: рециркуляция |
|---|---|---|---|---|
| 0 | 0 | остановка | ||
| 0 | 1 | ход |
| клавиша A/C (1) | клавиша REC (4) | положение селектора 6 | состояние: воздушный кондиционер | состояние: рециркуляция |
|---|---|---|---|---|
| 0 | 0 | остановка | остановка | |
| 0 | 1 | ход | ||
| 1 | 0 | остановка |
| клавиша A/C (1) | клавиша REC (4) | положение селектора 6 | состояние: воздушный кондиционер | состояние: рециркуляция |
|---|---|---|---|---|
| 0 | 0 | остановка | остановка | |
| 0 | ход | |||
| 0 | ||||
| 1 | остановка |
| клавиша A/C (1) | клавиша REC (4) | положение селектора 6 | состояние: воздушный кондиционер | состояние: рециркуляция |
|---|---|---|---|---|
| 0 | 0 | остановка | остановка | |
| 0 | 1 | ход | ||
| 0 | 0 | D | остановка |
| клавиша A/C (1) | клавиша REC (4) | положение селектора 6 | состояние: воздушный кондиционер | состояние: рециркуляция |
|---|---|---|---|---|
| 0 | 0 | остановка | остановка | |
| 0 | 1 | ход | ||
| 0 | 0 | остановка | ||
| 0 | 1 | ход |