This air conditioning equipment can be controlled in two ways
- Вручную
- Автоматически
Рекомендации/меры предосторожности
In the automatic position the performance of the air conditioning can never reach its peak level, as in this position, the air flow is limited by the voltage supplied to the blower unit (9 volts max.: reduced speed).
To obtain maximum efficiency in this setting, turn the head vents downwards so that the flow of cold air is not directly onto the passenger compartment temperature sensor (in the courtesy light)
Control panel
(1) air conditioning (air cooling) control switch
(2) air flow selection or automatic position (temperature and flow adjustment)
(3) auto. mode position
(4) выключатель положения ?Рециркуляция?
(5) required passenger compartment temperature selection
(6) selection of air flow direction
(7) air conditioning operating light
(8) recirculation position light
To obtain cold air
Нажать на кнопку выключателя (1) сигнализатор 7 загорелся
Расположить
- The temperature control selector (5) at the end of the blue zone
- The selector (6) in air flow to head position (to the right)
- The air flow selector to maximum
Optimum performance of the air conditioning
When the outside temperature and passenger compartment temperatures are high or with the aim of speeding up the production of cold air, press the recirculation control switch (4), the light (8) comes on
It is recommended that you, from time to time, change from the air recirculation position to refresh the air in the passenger compartment
Примечания
When the selector (6) is in the demisting position (towards the top) the A/C light (7) automatically comes on to speed up the demisting process
When the selector (2) is in the auto position, and the control (4) switched on, the A/C light automatically comes on in order to prevent condensation of the windows and to maintain visibility
Temperature selection (in auto mode) requires 12 to 15 seconds before the request is registered