Снятие
Снять (с каждой стороны)
- Болтов (2) (fixed to the splash shield)
- Болта (3) и (4) (fixed to the front wing)
- Болтов (1) (fixed to the lower cross member)
- Передний бампер (5)
Разборка
Remove the foglamps, (винты (6) и (7))
Снять
- The bumper side pieces (8)
- Центральная накладка (9)
- The brake diffuser clips (10)
- The deflector clips (11)
ПримечаниеThe brake diffusers and deflector are originally fitted using clips. on refitting, the clips should be replaced by rivets 4,8 x 30
Сборка
Действовать в последовательности, обратной операциям по разборке
ВниманиеWhen replacing a front bumper equipped with headlamp wash, the bumper and side pieces must be marked out and drilled
Mark out each side of the bumper
Drill and cut out at right angles to the surface
Mark out and drill the bumper side pieces
Установка
Установка производится выполнением операций по снятию в обратном порядке
ВниманиеMake sure patch (12) is in place, fill patch with polyurethane mastic (GURIT)
Locate tab "a" of the front wing in opening "b" of the bumper