Рекомендуемое оборудование
ВниманиеThe reference bolts in the data sheets are intended solely to centre the adaptor pieces of the recommended tools
Обозначения
- [1] M8 screw
- [2] M10 screw
- [3] M12 screw
- [4] M14 screw
- (1) top of the body jig clamps (передние)
- (2) top of the body jig clamps (задние)
- (3) centre line of clamps (передние)
- (4) centre line of clamps (задние)
- (5) shafts or bolts (Ø 12 мм)
ПримечаниеThe mating faces (jacking point) of the vehicle must be against the shafts (5) to obtain the correct reference position
Проверка разобранного кузова
- (6) с левой стороны
- (7) с правой стороны
Проверка с установленными механическими элементами
- (6) с левой стороны
- (7) с правой стороны
- (8) инструмент M217 (длиной 180 мм)
- (9) theoretical dimension: 161 мм. dimension read on the pin: 119 мм