ВниманиеНа все очищенные поверхности должно быть нанесено защитное покрытие с помощью соответствующего процесса электролитической оцинковки: номер (реферанс) C8
Идентификация запасных частей
Right hand front half panel
Right front half panel protector plate
Left hand front half panel
Left front half panel protector plate
Вырезание. просверливание. сборка
Mark out, cut away and discard the zone "a"
Fit the plate "b" to the half panel, then drill out 4 holes "c" to 3,5 mm diameter
Fit the plate "b" on the front panel using blind rivets of 3,2 mm diameter and 8 mm in length
Mark out, cut away and discard the zone "d"
Fit the plate "e" to the half panel, then drill out 4 holes "f" to 3,5 mm diameter
Fit the plate "e" on the front panel using blind rivets of 3,2 mm diameter and 8 mm in length
Установка
Смотреть соответствующую операцию