Field Remedy: 1647
| Subject: | Front Seat - Bowden cable jumps out of mounting plate |
|---|
| Models: | Engines: | Option: |
|---|---|---|
| Vectra-C 2003,Signum 2003 | All,All | None |
| Complaint: | Front seat LH&RH, longitudinal adjustment - bowden cable pops out. |
|---|---|
| Cause: | New bowden cable ending (Ball) might get loose. |
| Production: | Changed back to old design level of cable (Cylinder): W0L0ZCF6931116352 13.06.03 Rüsselsheim W0L0ZCF6838113134 13.06.03 Ellesmere Port |
Remedy:
In case of customer complaint replace bowden cable of seat adjustment.
Working Procedure:
1. Remove front seat
- see working procedure “ Front Seat, Remove and Install”, group “C”, Service Instruction Vectra-C.
2. Remove bowden cable (1) from seat adjustment guide, clip off holder (2) bowden cable (Picture I).
3. Clip off holder bowden cable (1) from locking device and remove bowden cable (2) (Picture II).
4. Remove bowden cable from retaining clip (Picture III, 1).
5. Clip bowden cable into retaining clip.
6. Install bowden cable and clip holder bowden cable into locking device.
7. Clip on holder bowden cable (2), fix bowden cable (1) into seat adjustment guide (Picture IV).
8. Install front seat
- see working procedure “ Front Seat, Remove and Install”, group “C”, Service Instruction Vectra-C.
Spare-Parts: Part-No.: Catalogue-No.:
Cable, Lenght Adjuster Front Seat 13100008 51 67 302
Labour Times: TC: Hours:
T8 164 70 Replace bowden cable 90 0.7 of seat adjustment – both sides
The costs for this repair will be covered for vehicles not older than 3 years and a mileage lower than 100.000 Km. The regular warranty procedure should be used for claiming Set-up-time.
| FunctionalGroup: | |
|---|---|
| Complaint Group: | |
| Trouble Code: |