Снятие
Unlock the front hood handles
Raise the front crossmember
Mark the hole (1) of the lever (4) at 173 mm
Mark the hole (2) of the lever (5) at 28 mm
Mark the hole (3) of the lever (6) at 79 mm
Высверлить с помощью сверла ø 5 мм
Нарезать резьбу метчиком в M6
Protect the holes using glass primer
Route the nylon cable (7) through the shaft (9) of hole (1) and the shaft (10) of hole (3)
Secure the grommet (8) to the shaft (11) of hole (2)
Secure the nylon cable to the levers (4), (6)