Subject:
Alterations to the Sintra headlamp wiring - RHD vehicles in the UK.
Vehicles:
Sintra 2.2 CD and 3.0 CDX
The following pages from the Sintra Circuit Diagram show changes to the headlamp systems that have been made for RHD vehicles in the UK.
The alterations relative to the previous diagrams are as follows:
Circuit Alteration
227 Line fuse F201 added in lead to relay K302
225 Line fuse F200 added in lead to new relays K300 and K301 from battery
230 Relay K302 added for low beam on vehicles with MID
234 Earth lead from relay K302 added
1600 Lead from relay K302 to check control unit P25, pins 6 and 7, added
1609 Lead to relay K302 (86) from fuse 25 added
1737 Relay K300 for low beam without MID added
1734 Lead from F24 to relay K300 added
1735 Line fuse F202 added in lead to relay K300
1736 Lead from relay K300 to low beam lamps E9 and E10 added
1738 Earth lead for relay K300 added
1745 Relay K301 for high beam added
1744 Lead from relay K301 to high beam lamps E7 and E8 added
1743 Line fuse F203 added in lead to relay K301
1744 Lead from F79 to relay K301 added
1748 Earth lead for relay K301 added
Circuit Diagram, Sintra (G5860)
Circuit 100 to 416
Voltage distribution
Abbreviations:
ABS Anti - lock brake system
BCM Body electronics module
(Body Control Module)
EMP Radio
IMO Immobiliser
MID Multi - Info - Display
TID Triple - Info - Display
F... Fuses
J... Wiring harness plug central electrical system
X13 Diagonostic plug
K302 Relay, low beam with MID
| .P. G5860.tif | 12 | 11 | tiff;; |
|---|
Circuit Diagram, Sintra (G5861)
Circuit 1600 to 1618
Bulb check sensor
Circuit 1619 to 1647
Multi - Info - Display
Circuit 1603 to 1609
Tail lamp (MID)
Circuit 1605 to 1611
Brake lamp (MID)
Circuit 1613 to 1615
Low beam (MID)
Abbreviations:
ABS Anti - lock brake system
EMP Radio
INS Instrument
MlD Multi - Info - Display
Grounding points:
1 Engine block
5.1 Instrument panel, right 6 Front member
9 D pillar
E2 Tail lamp, left
E5 Tail lamp, right
E9 Low beam, left
E10 Low beam, right
F Fuses
H9 Brake lamp, left
H10 Brake lamp, right
J... Wiring harness plug, central electrical system
P13 Outside temperature sensor
P25 Bulb check sensor
S63 Switch assembly, MID
S82 Control switch, washing fluid
S93 Control switch, residual coolant
S95 Control switch, residual engine oil
U16 Multi - Info - Display
X1 Wiring harness plug, instrument panel & body, left
X13 Diagnosis
X15 Wiring harness plug, body & car level control
X22 Wiring harness plug, trailer hitch (in preparation) X23 Wiring harness plug, tail lamp, right
X24 Wiring harness plug, tail lamp, left
X28 Wiring harness plug (8 - pin), instrument panel & engine (3.0 I engine)
X29 Wiring harness plug (8 - pin), instrument panel & engine (3.0 I engine)
X31 Wiring harness plug, instrument panel & front
X40.1 Wiring harness plug, Multi - Info - Display
X40.2 Wiring harness plug, Multi - Info - Display
| .P. G5861.tif | 12 | 11 | tiff;; |
|---|
Circuit Diagram, Sintra (G5862)
Circuit 1724 to 1729
Licence plate lamp
Circuit 1734 to 1740
Low beam
Circuit 1744 to 1746
High beam
Abbreviations:
BCM Body electronics module
(Body Control Module)
DRL Daytime driving lamp
EMP Radio
INS Instrument
MID Multi - Info - Display
Grounding points:
6 Front member
9 D pillar
E3.1 Licence plate lamp, left
E3.2 Licence plate lamp, right
E7 High beam, left
E8 High beam, right
E9 Low beam, left
E10 Low beam, right
F... Fuses
J... Wiring harness plug, central electrical system
K300 Relay, low beam without MID
K301 Relay high beam
S2 Switch, light assembly
S5.2 Switch, low beam / high beam
X1 Wiring harness plug, instrument panel & body left
X10 Wiring harness plug (48 - pin), instrument panel & steering column
X18 Wiring harness plug (8 - pin), body & tailgate
X19 Wiring harness plug (2 - pin), body and tailgate
| .P. G5862.tif | 12 | 11 | tiff;; |
|---|
Wiring Harness Routing - Sintra 2.2 CD
The new wiring harness for the Sintra 2.2 CD is routed as shown in diagrams T1929 and T1810.
Relays K300 and K301 are mounted at position 1 and the earth leads are positioned at point 2.
| Arrows indicate where new harness is cable tied to existing harness. | |||
|---|---|---|---|
| .P. T1929.tif | 9 | 7,5 | tiff;; |
| .P. T1810.tif | 9 | 7,5 | tiff;; |
Wiring Harness Routing - Sintra 3.0 CDX
The new wiring harnesses for the Sintra 3.0 CDX are routed as shown in diagrams T1809, T1966, T1811 and T1812.
Relay K301 is mounted at position 1 and the earth lead is positioned at point 2.
| Arrows indicate where the new harness is cable tied to the existing harness | |||
|---|---|---|---|
| .P. T1809.tif | 9 | 7,5 | tiff;; |
| .P. T1966.tif | 9 | 7,5 | tiff;; |
| Relay K302 is mounted under the centre console at position 1 and the earth lead is positioned at point 2. | |||
| .P. T1811.tif | 9 | 7,5 | tiff;; |
| Line fuse F201 located at position 3 at rear of fuse box. | |||
| .P. T1812.tif | 9 | 7,5 | tiff;; |