Brakes - No or insufficient function
Models:
Movano 98-2000
Engines:
All
Option:
Group:
H - Brakes
Troublecode:
Non
Complaint:
No/Poor Function
Rear brake blocks during normal braking
Cause:
Production Solution:
Remedy:
Special Part:
No
Working procedure:
1. Remove brake drum,
- see working procedure "Brake Drum, Remove and Install", unit "H", Service Instruction Movano.
2. Sand and clean brake drum.
Advice:
Both brake drums have to have the same diameter. It is not permissible that a maximum diameter of 282,5 mm is exceeded.
3. Verify brake shoes, replace Ferode 3614 by Ferode 3614/1,
- see working procedure "Brake Shoes, Replace", unit "H", Service Instruction Movano.
| 4. Chamfer primary brake shoes on the leading edge over entire width for max.15 mm (pic. I, arrow) . | |||
|---|---|---|---|
| .P. _1327F01.tif | 9 | 7,5 | tiff;; |
5. Install brake drum,
- see working procedure "Brake Drum, Remove and Install", unit "H", Service Instruction Movano.
6. Check brake pads for wear and replace if necessary,
- see working procedure "Check Brake Pad for Wear" and "Brake Shoes, Replace", unit "H", Service Instruction Movano.
Spare Parts: Part Number: Catalogue Number:
Set, Rear Brake Shoes 09161446 45 01 146
Set, Brake Pads Front 09161450 45 01 150
Labour Time: TC: Hours:
T 8 132 70 Rework brake drums, 92 0.9hrs
check brake shoes and sand,
check brake pads front.
001 Replace brake shoes 0.7hrs
002 Replace brake pads 0.3hrs
The regular warranty procedure should be used for claiming set-up-time.Check rear brake shoes and replace if necessary.