Снятие
Опустить стекла
Выключить зажигание
Remove the fastener covers (1) using the bolts (2)
Use the strap supplied in the tool kit to hold the flaps open
Slacken the nuts (3) by 1/4 turn using the special spanner supplied in the tool kit
Отстегнуть из фиксаторов электрическое соединение (4)
Release the 2 front side handles (5)
Для выполнения следующей операции требуются два работника
Remove the hard top (6) and gently place it in on a clean surface
Manually open the hood cover and hold it open using one of the straps supplied in the tool kit
Remove the 2 side brackets (7) using the spanner (8) supplied in the tool kit
Release the access flaps and raise the hood to 250 mm from the windscreen
Manually close the hood cover
Close the hood
Check that the hood is air and water tight (in accordance with the equipment repair procedure
ПримечаниеIf the hood has not been used for a long period of time, the material must be wetted and allowed to stretch for 24 hours approximately
Установка
ПримечаниеBefore storing the hood in its housing, ensure that it is clean and dry
Установка производится выполнением операций по снятию в обратном порядке
ВниманиеDo not forget to connect the heated rear screen harness; this connection prohibits operation