Field Remedy: 1012
| Subject: | Transmission - Oil contamination |
|---|
| Models: | Engines: | Option: |
|---|---|---|
| Vectra-B 1996...1998,5,Calibra 1990...1997,Sintra 97...98 | X25XE| C25XE,X25XE| C25XE,X22XE | MT F25 |
| Complaint: | Oil contamination of the upper transmission compartment or the engine bay bulkhead. |
|---|---|
| Cause: | At high speed condition the transmission oil starts foaming and comes out through the gearshift adjusting pin. |
| Production: |
Remedy:
1. Check the oil level in accordance to the Service Instructions and correct if necessary.
2. Remove adjusting pin and install new plug Part-/Cat-No.: 90 105 651 / 07 55 709.
It is not recommended to use different oil discribed in the Service Instructions. For durabillity reasons only oil Part-/Cat-No.: 09 120 541 / 19 40 768 has to be used. Please asure that there is no additional breather installed. Only the orginal plug Part-/Cat-No.: 90 446 270 / 07 02 219 must be fitted (pls. see Service-Literature).
Labour operation: Carline: TC: Hours:
Adjust transmission oil level
T 8101 20 Vectra-B 92 0.2hrs
T 8101 21 Calibra 92 0.2hrs
T 8101 22 Sintra 92 0.2hrs
The regular warranty procedure should be used for claiming Set-up-time
| FunctionalGroup: | K - Clutch/Transmission |
|---|---|
| Complaint Group: | 10 - Leakages |
| Trouble Code: | Non |